Metrology Technician I with Security Clearance
Job Description Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefieldWe bring 120 years of successful mission support to improve security, streamline logistics, and enhance readinessAligned around a shared purpose, our $3.
9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalismResponsibilities What You'll Do:
This position assists in the performance of calibration of electronic and physical/dimensional measuring and test equipment to technical specifications, maintaining traceability to the National Institute of Standards and Technology (NIST)Metrology Technician 1 independently determines and performs operations to calibrate and certify electronic and physical/dimensional measuring and test equipmentThey utilize calibration methods and techniques to analyze equipment problems and meet accuracy and precision requirementsThey identify error sources and diagnose and repair malfunctions in complex measuring and test equipment using theories of operation, block diagrams, schematics, logic trees, and software diagnosticsKey
Responsibilities:
MET TECH I performs one or a combination of typical duties, such as:
Conducting repairs to the component level and replacement of electronic components and/or partsTroubleshooting, operating, installing, repairing, testing, and calibrating electronic, mechanical and/or specialized test equipmentTroubleshooting electronic and mechanical equipment to the component level, as well as demonstrating the ability to repair complex electronic and electromechanical assemblies to the component levelOperating oscilloscopes, power meters, spectrum analyzers, Test, Measurement, and Diagnostic Equipment (TMDE) and General-Purpose Electronic Test Equipment (GPETE)Performing repairs of TMDE such as Frequency Counters, Oscilloscopes, Microwave Equipment, Multimeters, Generators and Specialized Avionics Test Equipment, such as TACAN Test Set (T/S), Radar T/S, Transponder T/S, Weapons T/S as well as Automated Test Equipment (ATE) systemsUsing commercial and Navy documentation schematics, wiring diagrams, Instrument Calibration Procedures (ICPs) and technical service manuals (NAVAIR drawing and publications) to troubleshoot test equipment to board and component levelProviding required technical support to programs including, but not limited to, technical support services, logistics, information technology, software, test and evaluationKnowledge of technical engineering concepts, principles, and practices necessary to perform the full range of projects concerned with producing, overhauling, refurbishing, or redesigning systems such as GPETE and ATE systems or other combat or combat support systemsUse tools such as screwdrivers manual and battery operated, soldering equipment soldering irons, solder extractors, drills, pliers, wrenches, etcQualifications Minimum
Qualifications Education:
High School diploma (or equivalent) and 2 years of industry trade school or civilian college in electronics is requiredCompletion of an appropriate military A school and completion of at least one appropriate military B or C school may be substituted for the two-year requirement
Experience:
A minimum of 3 years of current, relevant experience in CalibrationKnowledge of function and troubleshooting of Naval Aviation Support Equipment such as AN/ARM-156 Radio Test Set, AN/UPM-155 Indicator Test Set, AN/AMW-96 Weapons Test Set, 1383AS200-1 Propeller Synchronizer Test Set, AN/ALM-283 Countermeasures Test Set, AN/ASM-663 TACAN Test Set, and AN/APM-403 Radar Altimeter Test Set is highly preferredOther Requirements:
An active DoD Secret clearance U.
SCitizenship status is required as this position will require the ability to access US only data system Ability to visually inspect, count, segregate, and store incoming calibration standards and equipmentMust be able to lift at least 50 lbs.
, unaidedEmployee must be able to move equipment from incoming carts to workstationsAble to stand for a period of time when working on equipmentDesired Qualifications
Experience:
Experience with USN Surface or Subsurface systems (desired)Experience with ISO9001:
2008 or equivalent, Quality Management Systems (preferred) Knowledge of Navy software such as MCMS, METPRO, FEDLOG, NATEC is highly preferredSkills & Technology Used Analytical Thinking & Problem Solving:
Possesses both analytical and interpersonal skillsGood problem solving, negotiation and organizational skills/techniquesBusiness Partner/Effective Communicator:
English language skills to communicate and negotiate with government personnelStrong communicator must be able to communicate clearly both in writing and orallyCustomer service oriented, detail focused, pro-active behavior, multi-task capabilitySoftware:
Microsoft Office Suite Excel Outlook SharePoint Personal computer, printer, copy machine and other general office equipmentWhat We Bring At V2X we strive to be market competitive in our total reward offeringsThe salary provided is intended to display the value of the company's base pay compensation for locations in the state of CaliforniaThe successful candidate's pay will be based on the current rate agreed in the applicable Wage Determination (WD) for this siteUSD $68,265.
60 Please speak with a recruiter for additional informationEmployee benefits include the following:
Healthcare coverage Life insurance, AD&D, and disability benefits Retirement plan Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plansWe are committed to an inclusive and diverse workplace that values and supports the contributions of each individualThis commitment along with our common Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation and expand our success in the global marketplaceV2X is an Equal Opportunity /Affirmative Action EmployerAll qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, protected veteran status or status as an individual with a disabilityEOE/Minority/Female/Disabled/VeteranResponsibilities What You'll Do:
This position assists in the performance of calibration of electronic and physical/dimensional measuring and test equipment to technical specifications, maintaining traceability to the National Institute of Standards and Technology (NIST)Metrology Technician 1 independently determines and performs operations to calibrate and certify electronic and physical/dimensional measuring and test equipmentThey utilize calibration methods and techniques to analyze equipment problems and meet accuracy and precision requirementsThey identify error sources and diagnose and repair malfunctions in complex measuring and test equipment using theories of operation, block diagrams, schematics, logic trees, and software diagnosticsKey
Responsibilities:
MET TECH I performs one or a combination of typical duties, such as:
Conducting repairs to the component level and replacement of electronic components and/or partsTroubleshooting, operating, installing, repairing, testing, and calibrating electronic, mechanical and/or specialized test equipmentTroubleshooting electronic and mechanical equipment to the component level, as well as demonstrating the ability to repair complex electronic and electromechanical assemblies to the component levelOperating oscilloscopes, power meters, spectrum analyzers, Test, Measurement, and Diagnostic Equipment (TMDE) and General-Purpose Electronic Test Equipment (GPETE)Performing repairs of TMDE such as Frequency Counters, Oscilloscopes, Microwave Equipment, Multimeters, Generators and Specialized Avionics Test Equipment, such as TACAN Test Set (T/S), Radar T/S, Transponder T/S, Weapons T/S as well as Automated Test Equipment (ATE) systemsUsing commercial and Navy documentation schematics, wiring diagrams, Instrument Calibration Procedures (ICPs) and technical service manuals (NAVAIR drawing and publications) to troubleshoot test equipment to board and component levelProviding required technical support to programs including, but not limited to, technical support services, logistics, information technology, software, test and evaluationKnowledge of technical engineering concepts, principles, and practices necessary to perform the full range of projects concerned with producing, overhauling, refurbishing, or redesigning systems such as GPETE and ATE systems or other combat or combat support systemsUse tools such as screwdrivers manual and battery operated, soldering equipment soldering irons, solder extractors, drills, pliers, wrenches, etcQualifications Minimum
Qualifications Education:
High School diploma (or equivalent) and 2 years of industry trade school or civilian college in electronics is requiredCompletion of an appropriate military A school and completion of at least one appropriate military B or C school may be substituted for the two-year requirement
Experience:
A minimum of 3 years of current, relevant experience in CalibrationKnowledge of function and troubleshooting of Naval Aviation Support Equipment such as AN/ARM-156 Radio Test Set, AN/UPM-155 Indicator Test Set, AN/AMW-96 Weapons Test Set, 1383AS200-1 Propeller Synchronizer Test Set, AN/ALM-283 Countermeasures Test Set, AN/ASM-663 TACAN Test Set, and AN/APM-403 Radar Altimeter Test Set is highly preferredOther Requirements:
An active DoD Secret clearance U.
SCitizenship status is Recommended Skills Analytical Assembly And Installation Audio Equipments Automatic Test Equipment Aviation Coordinating Apply to this job.
Think you're the perfect candidate? Apply on company site $('.
external-apply-email-saved').
on('click', function (event) window.
ExternalApply = window.
open('/interstitial?jobdid=j3s1lz65jjyr7gd1mbf', 'ExternalApply-j3s1lz65jjyr7gd1mbf'); ); Estimated Salary: $20 to $28 per hour based on qualifications.
9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalismResponsibilities What You'll Do:
This position assists in the performance of calibration of electronic and physical/dimensional measuring and test equipment to technical specifications, maintaining traceability to the National Institute of Standards and Technology (NIST)Metrology Technician 1 independently determines and performs operations to calibrate and certify electronic and physical/dimensional measuring and test equipmentThey utilize calibration methods and techniques to analyze equipment problems and meet accuracy and precision requirementsThey identify error sources and diagnose and repair malfunctions in complex measuring and test equipment using theories of operation, block diagrams, schematics, logic trees, and software diagnosticsKey
Responsibilities:
MET TECH I performs one or a combination of typical duties, such as:
Conducting repairs to the component level and replacement of electronic components and/or partsTroubleshooting, operating, installing, repairing, testing, and calibrating electronic, mechanical and/or specialized test equipmentTroubleshooting electronic and mechanical equipment to the component level, as well as demonstrating the ability to repair complex electronic and electromechanical assemblies to the component levelOperating oscilloscopes, power meters, spectrum analyzers, Test, Measurement, and Diagnostic Equipment (TMDE) and General-Purpose Electronic Test Equipment (GPETE)Performing repairs of TMDE such as Frequency Counters, Oscilloscopes, Microwave Equipment, Multimeters, Generators and Specialized Avionics Test Equipment, such as TACAN Test Set (T/S), Radar T/S, Transponder T/S, Weapons T/S as well as Automated Test Equipment (ATE) systemsUsing commercial and Navy documentation schematics, wiring diagrams, Instrument Calibration Procedures (ICPs) and technical service manuals (NAVAIR drawing and publications) to troubleshoot test equipment to board and component levelProviding required technical support to programs including, but not limited to, technical support services, logistics, information technology, software, test and evaluationKnowledge of technical engineering concepts, principles, and practices necessary to perform the full range of projects concerned with producing, overhauling, refurbishing, or redesigning systems such as GPETE and ATE systems or other combat or combat support systemsUse tools such as screwdrivers manual and battery operated, soldering equipment soldering irons, solder extractors, drills, pliers, wrenches, etcQualifications Minimum
Qualifications Education:
High School diploma (or equivalent) and 2 years of industry trade school or civilian college in electronics is requiredCompletion of an appropriate military A school and completion of at least one appropriate military B or C school may be substituted for the two-year requirement
Experience:
A minimum of 3 years of current, relevant experience in CalibrationKnowledge of function and troubleshooting of Naval Aviation Support Equipment such as AN/ARM-156 Radio Test Set, AN/UPM-155 Indicator Test Set, AN/AMW-96 Weapons Test Set, 1383AS200-1 Propeller Synchronizer Test Set, AN/ALM-283 Countermeasures Test Set, AN/ASM-663 TACAN Test Set, and AN/APM-403 Radar Altimeter Test Set is highly preferredOther Requirements:
An active DoD Secret clearance U.
SCitizenship status is required as this position will require the ability to access US only data system Ability to visually inspect, count, segregate, and store incoming calibration standards and equipmentMust be able to lift at least 50 lbs.
, unaidedEmployee must be able to move equipment from incoming carts to workstationsAble to stand for a period of time when working on equipmentDesired Qualifications
Experience:
Experience with USN Surface or Subsurface systems (desired)Experience with ISO9001:
2008 or equivalent, Quality Management Systems (preferred) Knowledge of Navy software such as MCMS, METPRO, FEDLOG, NATEC is highly preferredSkills & Technology Used Analytical Thinking & Problem Solving:
Possesses both analytical and interpersonal skillsGood problem solving, negotiation and organizational skills/techniquesBusiness Partner/Effective Communicator:
English language skills to communicate and negotiate with government personnelStrong communicator must be able to communicate clearly both in writing and orallyCustomer service oriented, detail focused, pro-active behavior, multi-task capabilitySoftware:
Microsoft Office Suite Excel Outlook SharePoint Personal computer, printer, copy machine and other general office equipmentWhat We Bring At V2X we strive to be market competitive in our total reward offeringsThe salary provided is intended to display the value of the company's base pay compensation for locations in the state of CaliforniaThe successful candidate's pay will be based on the current rate agreed in the applicable Wage Determination (WD) for this siteUSD $68,265.
60 Please speak with a recruiter for additional informationEmployee benefits include the following:
Healthcare coverage Life insurance, AD&D, and disability benefits Retirement plan Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plansWe are committed to an inclusive and diverse workplace that values and supports the contributions of each individualThis commitment along with our common Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation and expand our success in the global marketplaceV2X is an Equal Opportunity /Affirmative Action EmployerAll qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, protected veteran status or status as an individual with a disabilityEOE/Minority/Female/Disabled/VeteranResponsibilities What You'll Do:
This position assists in the performance of calibration of electronic and physical/dimensional measuring and test equipment to technical specifications, maintaining traceability to the National Institute of Standards and Technology (NIST)Metrology Technician 1 independently determines and performs operations to calibrate and certify electronic and physical/dimensional measuring and test equipmentThey utilize calibration methods and techniques to analyze equipment problems and meet accuracy and precision requirementsThey identify error sources and diagnose and repair malfunctions in complex measuring and test equipment using theories of operation, block diagrams, schematics, logic trees, and software diagnosticsKey
Responsibilities:
MET TECH I performs one or a combination of typical duties, such as:
Conducting repairs to the component level and replacement of electronic components and/or partsTroubleshooting, operating, installing, repairing, testing, and calibrating electronic, mechanical and/or specialized test equipmentTroubleshooting electronic and mechanical equipment to the component level, as well as demonstrating the ability to repair complex electronic and electromechanical assemblies to the component levelOperating oscilloscopes, power meters, spectrum analyzers, Test, Measurement, and Diagnostic Equipment (TMDE) and General-Purpose Electronic Test Equipment (GPETE)Performing repairs of TMDE such as Frequency Counters, Oscilloscopes, Microwave Equipment, Multimeters, Generators and Specialized Avionics Test Equipment, such as TACAN Test Set (T/S), Radar T/S, Transponder T/S, Weapons T/S as well as Automated Test Equipment (ATE) systemsUsing commercial and Navy documentation schematics, wiring diagrams, Instrument Calibration Procedures (ICPs) and technical service manuals (NAVAIR drawing and publications) to troubleshoot test equipment to board and component levelProviding required technical support to programs including, but not limited to, technical support services, logistics, information technology, software, test and evaluationKnowledge of technical engineering concepts, principles, and practices necessary to perform the full range of projects concerned with producing, overhauling, refurbishing, or redesigning systems such as GPETE and ATE systems or other combat or combat support systemsUse tools such as screwdrivers manual and battery operated, soldering equipment soldering irons, solder extractors, drills, pliers, wrenches, etcQualifications Minimum
Qualifications Education:
High School diploma (or equivalent) and 2 years of industry trade school or civilian college in electronics is requiredCompletion of an appropriate military A school and completion of at least one appropriate military B or C school may be substituted for the two-year requirement
Experience:
A minimum of 3 years of current, relevant experience in CalibrationKnowledge of function and troubleshooting of Naval Aviation Support Equipment such as AN/ARM-156 Radio Test Set, AN/UPM-155 Indicator Test Set, AN/AMW-96 Weapons Test Set, 1383AS200-1 Propeller Synchronizer Test Set, AN/ALM-283 Countermeasures Test Set, AN/ASM-663 TACAN Test Set, and AN/APM-403 Radar Altimeter Test Set is highly preferredOther Requirements:
An active DoD Secret clearance U.
SCitizenship status is Recommended Skills Analytical Assembly And Installation Audio Equipments Automatic Test Equipment Aviation Coordinating Apply to this job.
Think you're the perfect candidate? Apply on company site $('.
external-apply-email-saved').
on('click', function (event) window.
ExternalApply = window.
open('/interstitial?jobdid=j3s1lz65jjyr7gd1mbf', 'ExternalApply-j3s1lz65jjyr7gd1mbf'); ); Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
